| |
ITW Vortec's Transvector® Vacuum Pumps pull liquids
directly into 55 gallon drums quickly and efficiently.
Drum-emptying capabilities may be added with Vortec's
Dual Mode TVPTM Transvector Vacuum Pump. |
|
 |
All Vortec Transvector Vacuum Pumps feature:
- Fast setup -- install on drum in less than a minute.
- No moving parts; constructed with materials designed for
years of reliable operation.
- Automatic safety shut-off valve to prevent overflows.
- Durable aluminum and steel tools plus heavy-wall,
smooth-bore PVC hose with quick-release coupling.
- Optional wand and squeegee (Model 2102) to add spill
pick-up capabilities.
The Dual Mode TVP Transvector Vacuum Pump offers these
additional features:
- Switch between empty and fill modes in less than 10
seconds.
- Spring-loaded pressure relief valve.
Models:
| |
|
|
|
WATER FLOW
RATE (GPM) |
| Model No. * |
INLET PRESSURE PSIG
(BAR) |
AIR CONSUMPTION SCFM
(SLPM) |
VACUUM (INCHES OF
MERCURY) |
FILL |
EMPTY |
| 2101 |
100 (6.9) |
22.5 (637) |
8.7 |
40.0 |
-- |
| 2104 |
100 (6.9) |
22.0 (623) |
10.5 |
29.5 |
45.0 |
* Includes pump, ball valve, safety shut-off
valve, 1.5" (4cm) I.D. vacuum hose (10' (3m) length) with
coupling, 18" (46cm) aluminum wand and evacuation tube
(Model 2104 only).
40 to 100 PSIG (2.8 - 6.9 Bar) compressed-air
source required for operation.
The TVP and Dual Mode TVP are not intended
for use with flammable or volatile liquids such as gasoline,
alcohol, kerosene, aviation fuel, mineral spirits or any
materials that have a low flash point.
Back to Top of
Page
Hand-E-VacTM
Industrial Cleaning Guns
Vacuuming or blowoff is fast and efficient with the
Hand-E-Vac™ Industrial Cleaning Gun. Hand-E-Vac is
powerful yet economical and easy-to-use. The
compressed-air-powered Hand-E-Vac switches from a vacuum
to a blow gun in seconds simply by reversing the nozzle
insert. A complete range of Hand-E-Vac accessories is
available for total industrial cleaning versatility. Use
Hand-E-Vac DH to remove chips from deep holes after
drilling. All Hand-E-Vac models are made of
impact-resistant materials for durability and have no
moving parts to break. |
 |
Models:
Choose the Hand-E-Vac Gun and Accessory Kit that best fits your
application:
| MODEL NO. |
DESCRIPTION |
| 2001 |
Hand-E-Vac gun only. |
| 2007 |
Hand-E-Vac DH Deep-Hole gun only. |
| 2004 |
Hand-E-Vac Accessory Kit, includes 2
Extension Rods, Crevice Tool, Skimmer Tool and Brush. |
| 2010 |
Hand-E-Vac Conveying Kit, includes
Extension Rod, 10' (3m) Hose and Clamp. |
| 2011 |
Hand-E-Vac Bag Kit, includes Extension
Rod, Dust Bag and Clamp. |
| 2012 |
Hand-E-Vac Waste Containment Kit,
includes Extension Rod, 10' (3m) Hose, Drum Cover, Hose
Clamps and Clip. |
Back to Top of
Page
Copyright (c) 1996 ITW Vortec
|
Search 
